Panasonic WORKIO DP-2310 Operating Instructions Manual page 10

Getting Started
Address Book (Adding a New Network Server)
4
Button Name
CAPS
NUMERIC/
SYMBOLS
BACK SPACE
SPACE
OK
CANCEL
5
6
7
10
Entering capital letters.
Entering the numerical and symbol marks.
1
When you touch the NUMERIC/SYMBOLS button, the
symbols will be displayed.
2
Select the numeric or symbol mark(s) then touch the
CLOSE button.
Moving the cursor (_) to left or right side.
Erasing the letter to the left of the cursor (_).
Entering a space.
Registration is completed.
Registration is canceled.
Then enter the Name (Station Name) by using
the QWERTY keyboard and the touch the OK
button.
(Up to 15 characters)
Ex: Document Save or Docu. Retrieve
Function
Then enter the Key Name (up to 15 characters)
and touch the OK button.
By default, the Key Name will be up to 15 characters of
the station's name. If you do not want to change it, touch
the OK button.
If you want to assign this address into the
Favorite section, touch YES.
NOTE: The Address Book area is reduced by the
number of assigned Favorite stations.
Select DD and then touch the OK button.