Advertisement
Specifications
IMPORTANT SAFETY INFORMATION
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
1. Wear ANSI-approved safety goggles and heavy-duty,
chemical resistant work gloves during use.
2. Keep work area clean and well lit.
3. Keep bystanders out of the work area.
4. Do not operate when tired or when under
the influence of drugs or medication.
5. This product is not a toy. Do not allow children to
play with or near this item.
6. Use as intended only. Only use pump with
non-corrosive lubricants. Do not use with gasoline,
kerosene or diesel fuel.
7. Inspect before every use; do not use if parts are
loose or damaged.
Page 2
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
Addresses practices not related to personal injury.
Reservoir Capacity
Tubes Dimensions
Compatible Fluids
Incompatible Fluids
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
will result in death or serious injury.
could result in death or serious injury.
could result in minor or moderate injury.
7 oz.
7-1/2" L x 0.14" I.D. (6mm)
7-1/2" L x 0.24" I.D. (8mm)
Brake Fluid, Engine Oil, Gear
Oil, Antifreeze/Coolant
Gasoline, Kerosene, Diesel
Fuel
8. Know and obey city and state laws for proper
disposal of oil. Recycle or dispose of oil properly in
accordance with all local laws and regulations.
9. Do not use near open flame or other ignition sources.
10. When transferring oil, make certain that fluid is
sufficiently cool prior to transfer. If transferring from
a vehicle, make sure vehicle's engine is off, and oil
and engine components are cool.
11. Follow all guidelines regarding materials being
transferred, including SDS instructions and
EPA regulations.
12. Maintain product labels and nameplates. These
carry important safety information. If unreadable
or missing, contact Harbor Freight Tools for
a replacement.
Item 59513
Advertisement
