Download Print this page
Pittsburgh 62831 Owner's Manual & Safety Instructions

Pittsburgh 62831 Owner's Manual & Safety Instructions

40 piece carbon steel sae tap and die set

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2015 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19j

Advertisement

loading

Summary of Contents for Pittsburgh 62831

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2 9. The flutes on these tools are sharp and 14. Maintain product labels and nameplates. can cut you. Handle with care. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Page 2 For technical questions, please call 1-888-866-5797. Item 62831...
  • Page 3 1/2 turn of progress, depending on material hardness. Continue this forward and back process, using proper lubrication, until you have cut the desired length of threads. 7. Then turn the Die counterclockwise completely off the rod. Item 62831 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Maintenance and Servicing 1. Clean immediately after use and apply a light 2. Store tools in the provided case in a secure layer of oil or grease to prevent corrosion. location, out of the reach of children, to protect them from moisture. Note: The carbon steel parts of this set are susceptible to corrosion.