Pittsburgh 3755 Instructions And Precautions

TUBING
BENDER
Model
INSTRUCTIONS AND
PRECAUTIONS
Visit our website at: http://www.harborfreight.com
SAVE THESE
INSTRUCTIONS.
READ ALL
PRECAUTIONS AND
INSTRUCTIONS.
©
Copyright 2010 by Harbor Freight Tools
reserved. No portion of this document or any artwork
contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight
Tools. Diagrams within this document may not be drawn
proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
For technical questions or replacement parts,
please call 1‑800‑444‑3353.
3755
®
. All rights

SPECIFICATIONS

Die Range
Max. Bending Angle
UNPACKING
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at
1‑800‑444‑3353 as soon as possible.
IMPORTANT SAFETY INFORMATION
To prevent serious injury and/or property damage:
1. Wear ANSI‑approved safety goggles and heavy‑
duty work gloves during assembly.
2. Use for 1/4" to 3/8" tubing only. Do not attempt to
bend tubing greater than 3/8".
3. Use for aluminum, copper and steel tubing only.
4. Inspect lines carefully after forming; discard
damaged or malformed lines.
5. This product is not a toy. Do not allow children to
play with or near this item.
6. Use as intended only.
7. Inspect before every use; do not use if parts are
loose or damaged.
8. Maintain product labels and nameplates. These
carry important safety information. If unreadable
or missing, contact Harbor Freight Tools for a
replacement.
Record Serial Number Here:
Note: If product has no serial number, record month
and year of purchase instead.
Note: Some parts are listed and shown for illustration
purposes only, and are not available individually
as replacement parts.
Please Note:
No replacements parts are available for this item
1/4", 5/16", 3/8"
180°
.