Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Manual Revised 11b
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22d
58450
Advertisement
Table of Contents
Related Manuals for Maddox MBD1
Summary of Contents for Maddox MBD1
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
Specifications Glue Gun 120VAC / 60Hz / 40W Important Safety Information TO PREVENT SERIOUS INJURY: 1. TO PREVENT ELECTRIC 6. This product is not a toy. SHOCK: Keep glue gun Do not allow children to play dry, do not use in rain. with or near this tool. - Page 3 Instructions Note: This Kit will not repair ALL 2. Using clean cloth (not included), dents, regardless of size. It will not clean dent area with Release Agent. work on aluminum surfaces. 3. Choose Pull Tab the 1. Insert Glue Stick into Glue Gun. same size as dent.
- Page 4 Lever Puller Use on a small dent. 5. Clean area thoroughly to remove Release Agent residue. 1. Place Lever Puller on the Pull Tab. Turn knob until both of the Puller’s feet are flat against the vehicle’s surface. 2. Slowly squeeze the Lever Puller’s handles until there is a pop and the dent is raised.
- Page 5 Repairing High Spots Shape Sticks Use a hammer (sold separately) and Knockdown Tool or Shape Stick Hold the desired Shape Stick against raised spot until desired over raised area and lightly tap smoothness is reached. hammer on the head of the tool to push the raised area down.
-
Page 6: Please Read The Following Carefully
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. -
Page 7: Parts List
Parts List Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify 193175439307 when ordering parts. -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.