Advertisement
MaxiMist Pro Series Spray Gun
Your purchase includes the MaxiMist Pro Series Spray Gun
Please read these instructions carefully and keep for your reference.
Refer to the included instruction manual as well for your Spray Tanning units operation.
Takes a few minutes to read and understand how to operate your new MaxiMist Pro Series
Spray Gun and you will be able to provide the perfect flawless tan with every application.
Your MaxiMist Pro Series Spray Gun is packaged with the following:
1. MaxiMist Pro Series Spray Gun
2. Instruction Manual
3. 3 Extra Cups with lids
4. Tune-up kit includes:
• Duck Bill Assembly
• Gland Seal
• Cup Gasket (3 pcs)
• Fluid Tube Assembly
• Cleaning Brush
• Spanner/ Wrench
• Gun Lube
Advertisement
Table of Contents
Related Manuals for MaxiMist Pro Series
Summary of Contents for MaxiMist Pro Series
- Page 1 Refer to the included instruction manual as well for your Spray Tanning units operation. Takes a few minutes to read and understand how to operate your new MaxiMist Pro Series Spray Gun and you will be able to provide the perfect flawless tan with every application.
- Page 2 MaxiMist Pro Series Spray Gun Exploded Diagram Accessories kit...
- Page 3 Preparing your equipment for use Your tanning equipment is supplied as two main components, the motor unit with hose and the spray gun. Please refer to the exploded view on page 2 and follow the simple instructions below: • Unscrew the Cup (42) from the spray gun and fill with tanning solution. Do not overfill the Cup. Normally 2oz (50ml) of solution is enough for one application.
- Page 4 2. Adjusting the spray gun Spray patterns a. The MaxiMist Pro Series Spray Gun has three spray patterns to choose from, the most often used are a horizontal (left and right) spray pattern which is ideal for the lower body or vertical(up and down) spray pattern for upper body application.
- Page 5 Using your MaxiMist Pro Series Spray Gun for the first time a. The ON/OFF switch is located on the motor unit. Turn it on. You will hear a sound similar to a vacuum cleaner. You may also notice that air is now blowing out of the front of the spray gun .This is correct.
- Page 6 Rinse the Cup (42) under warm running water until clean. e. Fill the Cup (42) to 2oz (50ml) with MaxiMist MaxiClean Organic Spray Gun Cleaner. Reconnect spray gun to Air Hose. Turn on the motor unit. Direct the spray gun to a safe area and spray the spray gun cleaner through the spray gun until the Cup (42) is empty.
- Page 7 In the event you experience a problem with your unit system please contact our support team between 8.00am and 5.00pm EST at 727 834 9435 or email us at support@maximist.co. MaxiMist Spray Tanning Systems 11920 31st Ct N St.Petersburg, Fla 33716...
Need help?
Do you have a question about the Pro Series and is the answer not in the manual?
Questions and answers