Advertisement
Quick Links
Advertisement
Related Manuals for MaxiMist SprayMate Plus
Summary of Contents for MaxiMist SprayMate Plus
- Page 1 MaxiMist SprayMate Plus Professional Spray Tanning System...
- Page 2 Thank you for choosing the MaxiMist SprayMate Plus. Please read the following to help assist you with the set up and maintenance of your unit prior to first use. Contents included in pkg, please confirm all components before first use...
- Page 3 Overview Turbine Blower 1: Hose Connection 4: Power Cord Plug 2: Gun Holder 5: On/Off Switch 3: Grab Handle Spray Gun 1: Male Quick Connection 2: Material Flow Knob 3: Air Cap 4: Trigger 5: Cup...
- Page 4 Setting up your unit for use Insert power cord into the turbine blower Insert hose into turbine blower. Insert, twist to lock...
- Page 5 The proper way to use a MaxiMist spray gun is 4 inches away from the skin surface, with a 4-inch- wide/long spray pattern (at its longest point). This will give you the optimum application, while using the least amount of product (2-2.5oz per application, in two separate, back to back, coats of...
- Page 6 • Your goal is to achieve a 4-inch-wide/long “line” on its longest length while holding the spray gun 4 inches away from the towel. Continue to open/adjust the spray gun via its flow adjustment knob until you have a 4-inch-wide line. •...
- Page 7 Do not spray back and forth over a wet area. Move quickly. It should take about 5-7 minutes to apply two full body coats back to back of 1 oz each. Set nozzle cap by unscrewing the nozzle bezel. Turn the nozzle cap to correct position and tighten the bezel to hold the nozzle cap in place.
-
Page 8: Troubleshooting
REGULAR MAINTENANCE GUIDE After tanning, please clean the solution cup, the tube and nozzle at once. Spray water or alcohol to clean the inside parts of the gun. Clean the filter after tanning. Do not keep the blower working continuously for more than 30min. For long time using, please switch it off every 30min. - Page 9 The air flow The filter is dirty Clean the filter and dry is cutting in and out Power cord not attached Ensure the power cord is firmly The spray blower will attached to the base of the not turn on blower and wall socket Electricity not turned on Ensure that power point is on...
Need help?
Do you have a question about the SprayMate Plus and is the answer not in the manual?
Questions and answers