Related Manuals for MaxiMist SprayMate TNT HVLP ST610
Summary of Contents for MaxiMist SprayMate TNT HVLP ST610
- Page 1 MaxiMist™ SprayMate TNT HVLP ST610 Spray Tanning System With “Twist N Tan” Spray Gun Instruction Manual and Users Guide...
-
Page 2: Table Of Contents
SprayMate HVLP ST610 TNT Contents 1. Explanation of symbols used ........... . .1 2. -
Page 3: Explanation Of Symbols Used
Congratulations on purchasing a MaxiMist™ Spray Tanning System. This product has been specially designed to provide an efficient application of tanning solution products. Take a minute to read and understand how to operate your new MaxiMist™ system and you will be able to provide the perfect tan with every application. - Page 4 SprayMate HVLP ST610 TNT • DO NOT let children play with the Spray Tanning System. • NEVER leave spray tanning system unattended. • Stay alert and watch what you are doing. • DO NOT operate the unit when fatigued or under the influence of drugs or alcohol. •...
- Page 5 SprayMate HVLP ST610 TNT • NEVER open the Spray Tanning System yourself to carry out electrical repairs! • DO NOT place the spray gun on its side, as material could leak out. Grounding Instructions This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.
-
Page 6: Processable Materials
SprayMate HVLP ST610 TNT 4. Processable materials Liquid spray tanning solution Only use spray tanning solution up to the expiry date specified on the package. means, for example, that the substance can be used for 12 months after opening. Actual date of opening needs to be noted by the user and marked 12 M on the container or package. -
Page 7: Preparation Of The Spray Area
SprayMate HVLP ST610 TNT 6. Preparation of the spray area • Remove all objects from the spray area if possible, to avoid contamination from overspray. • Work in a room with a smooth, easy-to-clean surface. The use of a spray booth/spray tent and tanning extraction fan is recommended. 7. -
Page 8: Operation
MaxiMist Tanning Systems excludes any liability for damage which may arise from overspray, applica-tion errors, touch-ups, or non-compliance with the instructions provided here. -
Page 9: Tips On Using The Spray Tanning System
SprayMate HVLP ST610 TNT 11. Tips on using the spray tanning system Before commencing application, check that all necessary protective measures (nasal plugs, hair covering) have been taken. Practice on a large piece of newspaper or cotton towel first in order to find the optimal settings for the spray tanning solution used. -
Page 10: After Application Of The Spray Tanning Solution
SprayMate HVLP ST610 TNT 12. After application of the spray tanning solution The full tanning effect develops during the first 6-12 hours after the treatment. • Allow the spray tanning solution to dry for 5-10 minutes before getting dressed again. You can also use the air from the air hose to accelerate the drying process of the spray tanning... - Page 11 SprayMate HVLP ST610 TNT 9) Turn on the system and spray the cleaner into a sink or a cloth. 10) Fill container with 2 fl. oz of water, spray until empty. 11) Repeat the above procedure until the water emerging from the nozzle is clear. 12) Turn off the system and divide the spray gun.
-
Page 12: Maintenance
SprayMate HVLP ST610 TNT 14. Maintenance Important! NEVER operate the system without the air filter; dirt could be sucked in and interfere with the function of the system. 1) Change the air filter if it is soiled (check daily). 2) For this pull the air filter out of the unit (Fig. -
Page 13: Correction Of Malfunctions
SprayMate HVLP ST610 TNT 17. Correction of Malfunctions Malfunction Cause Remedy • No spray tanning Nozzle clogged ➞ Clean • solution comes out Material volume setting ➞ Turn material volume of the nozzle turned too far anticlockwise setting clockwise • No pressure build-up in ➞... - Page 14 SprayMate HVLP ST610 TNT Malfunction Cause Remedy • Atomization too Material volume setting ➞ Turn material volume coarse turned too far clockwise setting anticlockwise • Nozzle contaminated ➞ Clean • Too little pressure build-up in ➞ Tighten container container • Air filter heavily soiled ➞...
- Page 15 No representative or person is authorised to extend this warranty or to create for MaxiMist Tanning Systems any other liability in connection with the sale of any MaxiMist Tanning Systems product.
- Page 16 SprayMate HVLP ST610 TNT MaxiMist Tanning Systems 11920 31st Ct N St.Petersburg, Florida 33716 Sales: Tel: (727)-230-0565 Tech Support: Tel: (727)-834-9435 www.maximist.co Part. No. 2347130 06/2014_RS Not responsible for errors and changes.
Need help?
Do you have a question about the SprayMate TNT HVLP ST610 and is the answer not in the manual?
Questions and answers