PRESONUS StudioLive 16.0.2 Owner's Manual page 45

7 Software: Universal Control, SL Remote, Capture & Studio One Artist
7.3 Using StudioLive Remote for iPad
Channel Controls: Select Selects channel for Fat Channel Zoom and Portrait view.
When no Microview has been selected for Fat Channel Zoom, the channel
Select buttons merely display the channel number or name, if one has
been entered into the Scribble Strip in VSL. See Section 7.2.4.
Once Fat Channel Zoom is launched, the channel Select buttons
become active, and you can use them to select another channel
so that you can view its zoomed Fat Channel settings.
Channel Controls: Pan Controls the panning for each channel.
To pan a channel, tap and hold anywhere on the Pan control and then
slide your finger right or left while maintaining constant contact with the
iPad screen. These controls correspond directly to those in VSL and on the
StudioLive.
POWER USER TIP: The Pan control supports off-axis movement. Once you
have pressed a pan field to select it, you can slide your finger anywhere in the
screen and make a side-to-side movement to control the pan position.
The pan position is displayed in the Channel Select field.
Channel Controls:Mute Controls the mute for each channel.
To Mute a channel, tap its Mute button. The Mute button will turn red,
indicating that the channel has been muted.
Channel Controls: Controls the level for each channel and displays each channel's metering.
Fader and Metering
To control the volume of a channel, tap the fader and move your finger up
or down, while maintaining constant contact with the iPad screen.
POWER USER TIP: The fader supports off-axis movement. Once you
have touched a fader to select it, you can slide your finger anywhere in
the screen and make a up/down movement to control the fader.
The fader position is displayed in the Channel Select field.
As with VSL, the fader position set in StudioLive Remote is the level
that you will hear. To sync the physical faders on your StudioLive
with StudioLive Remote, press the Locate button on your mixer.
While in Locate mode, the physical faders on your StudioLive will not
be active, so you can adjust them without any changes in level.
To the left of the fader, the user will see the meter for the channel. The
meter will follow the meter mode selected on the StudioLive or from VSL.
Meter mode cannot be changed from VSL.
82 82
PreSonus StudioLive ™ 16.0.2 Owner's Manual
Software: Universal Control, SL Remote, Capture & Studio One Artist
Masters Overview Displays the metering for the Main bus.
Masters Section Page
Tap to open the Masters Section page.
In the upper left-hand corner of every page in StudioLive Remote
(Overview, Aux Mixer, and Graphic EQ), you will find the Masters
Overview. This displays the metering for the Main bus.
7
Using StudioLive Remote for iPad 7.3
Tapping on the Masters Overview will
open the Masters Section Page.
The Masters Section page displays the fader, meter,
and Fat Channel Microviews for the Mains. These
parameters are controlled the same way they are
controlled for channels in the Overview page.
Tapping on any of the Fat Channel Microviews
will close the Masters Section Page. The Fat
Channel Zoom will open with the selected
parameter in focus for the selected bus.
To close the Masters Section page, simply tap
anywhere outside it.
83 83