Assembly - LAMINOX IDRO Hot Spot 13 Use And Maintenance Instructions

1 Insert one pipe on top of the other, respecting the order shown in figure 2
2 Fit the net on the pipes and slide it to the bottom (Fig. 3)
3 Place the support plate and the lower dish over the pipes, then secure everything with the supplied wing
nuts (Fig.4)
4 Lay the three support and the upper dish, then secure everything with the supplied wing nuts (Fig.5)
5 Tighten the carrying handle. (Fig.6)
Fig. 1
Fig. 4

3 ASSEMBLY

Fig. 2
Fig. 5
6
Fig. 3