Panasonic WJ-MPU955A User Manual page 64

1. Highlight the available target ID you wish to assign to the selected action for
the selected alarm
2. Click the Assign Target icon to assign the selected target to the
selected action for the selected alarm
The Display Mode and Output Port sections are informational only.
3. Click EXIT when finished assigning targets to actions associated with alarms
More than one alarm target can be assigned to each action. A target can be
assigned to more than one action. More than one alarm ID can contain the
same alarm targets in its actions.
Removing an Assigned Target
From the Target tab of the Alarms window:
1. Highlight the alarm you wish to remove a target from
2. Highlight the assigned target you wish to remove
3. Click the Remove Assigned Target button
4. Click EXIT to exit
Configuration
60