Panasonic WJ-MPU955A User Manual page 18

Viewing and Programming
In each of the components' permissions tabs that contain a section like the
one shown to the left, modes can be viewed and programmed.
Clicking the View option button allows you to view permissions for the
mode chosen, and defaults to programming for the same mode. In the
case of the graphic to the left, mode 1 is set for viewing, and thereby
programming.
The permissions grid reflects the contents of the mode whose view is
selected with the View option button. In the image below, the permission
grid is displaying the contents of mode 1.
More than one mode can be programmed at the same time by clicking on
the Prog check boxes of the other mode numbers that you wish to
program simultaneously. This will append, or add any permissions that
are then changed on the permissions grid, but will not duplicate entire
modes or overwrite existing permissions in the other modes.
The image to the left indicates that the permissions grid would now be
displaying the contents of mode 3 (which is also by default being
programmed), and would simultaneously be programming any subsequent
changes into modes 1 and 4 as well.
It is not necessary to perform a Save for each mode viewed or programmed. Saving
permissions, when completed, automatically saves all four modes, regardless of the
current View or Prog selection. Permissions are described on page 67.
Configuration
14