Panasonic WJ-MPU955A User Manual page 58

monitor. The Last port indicates which port will be triggered when the alarm actions are
removed from the target monitor.
4. Click the green check mark to add the series of monitors, or click the red X
to cancel
The permission grid is shown by monitor ID only.
A monitor can only be a member of one target. Therefore, when adding
additional targets, monitors that are already assigned to a different target
appear as yellow blocks. Green blocks indicate monitors assigned to the
highlighted target ID. White blocks are either unassigned or undefined
monitor IDs.
To re-assign a monitor to a different target, remove the monitor from its
current target, thus making it available for re-assignment. You can determine
what target ID it is currently assigned to by clicking on it and seeing the ID
number that appears in the Target box under the grid.
Targets cannot be deleted if they are assigned. The assignment must be
removed from the Alarms window prior to deleting it.
The Other tab shows the alarm(s) that the selected target is assigned to. Targets are
assigned to alarms from the Target tab of the Alarms (Records) window as described
below.
Use the Edit Record or Delete Record icons at the bottom of this window to edit or delete
alarm target records as needed.
Configuration
54