Panasonic WJ-MPU955A User Manual page 146

Admin console
Hide thumbs Also See for WJ-MPU955A:
Table of Contents

Advertisement

D I G I T A L S Y S T E M S E T U P
F i e l d D a t a
NTP Port No. Description: Specifies a NTP server port number.
Validation: hexadecimal numeral 0000 -FFFF
Default Setting: (None)
NTP Time Interval Description: Specifies a NTP sequence time in hex format. The time unit is in hours.
Validation: hexadecimal numeral 01 - 18
Default Setting: 1
Host Name Description: Specifies a host name of the device. It is a string up to 64 characters.
Validation: Within 64 characters.
Default Setting: (None)
Time Zone Description: Specifies time zone where the device is operating.
Validation: EST: Eastern Standard Time; CST: Central Standard Time; MST: Mountains
Standard Time; PST: Pacific Standard Time
Default Setting: (None)
Daylight Savings Description: Specifies whether to turn on daylight saving time or not.
Validation: 0 to turn off and 1 to turn on
Default Setting: 0
Speed/Duplex Description: Specifies a transmission speed between each encoder or decoder and a network
device such as a switching hub or a router.
Validation: 0 for auto, 1 for 100 Base-TX FULL DUPLEX, 2 for 100 Base-TX HALF
DUPLEX, 3 for 1000 Base-T
Default Setting: 0
Comment Description: A string to put comment notes.
Validation: Within 16 characters.
Default Setting: (None)
Encoder
E N C O D E R
F i e l d D a t a
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a
system domain. Its format is shown as below:
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved]
Default Setting: 0x0F000XXX
XXX is the value registered in Address[SW1] of the previous page .
Note: See MPEG2 Encoder and MPEG2 Decoder Operating Instructions.
Sub Device ID Description: GX sub device identifier is a local physical number that is uniquely identified
within the device. It also refers as a channel.
Validation: 0 - 3
Default Setting: Automatically assigned from 0 to 3.
Appendix A
_ _ _ _ _ X X X
device id (by rotary SW of an encoder front panel)
X X X X X _ _ _
device type
142

Advertisement

Table of Contents
loading

Table of Contents