Pairing a Bluetooth® Device ................10 Call Answering ....................11 Stereo-Link : Linking Two Speakers ............12 Using the Radio ....................13 TROUBLESHOOTING ............... 14 APPENDIX ................. 15 Technical Specifications .................. 15 Trademarks & Licenses ..................15 ION Audio Party Splash™ User Guide...
INTRODUCTION Thank you for purchasing the Party Splash . At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.
SETUP Use and Care Please review the tips below to get the best performance from your Party Splash speaker: Party Splash is IP67 waterproof, submersible up to 3 ft. (1 m) for 30 minutes, and dust-/ • dirt-/sand-proof. If the speaker fills with water, the sound will be mu ed until the water has drained.
Here are some other recommendations for getting the longest life from the internal battery. General Usage Fully charge the battery before using it. Avoid full discharge of the battery if possible. Li-Ion batteries are maintenance-free, and the battery will last longest when operating between 30–80% charged.
Solid Red: Charging. If the unit is powered o , the LED will turn o once charging • is complete. Battery status can also be seen from the ION Sound Control app. Double-press this button to activate or deactivate the voice prompts.
Page 7
Solid Color: The lights will all be lit in a single color (by default, blue). You can • change the color using the ION Sound Control app. Random: The lights cycle through the other four color modes randomly, changing •...
While in Bluetooth mode or FM mode, connecting a cable to the Aux input will • automatically switch Party Splash to Aux mode. If the cable is removed while in Aux mode, Party Splash will revert to the last mode • it was last in, either FM or Bluetooth.
IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS on your device. Follow these steps to download the free app on your device: 1. Open the Apple App Store or Google Play on your device. Then, search for the ION Sound Control app.
FM mode or using the Aux input, you will need to press the Bluetooth button to switch to Bluetooth mode. 2. Navigate to your device’s Bluetooth setup screen, find PARTY SPLASH, and connect. Note: Do not connect to iSP149B_BLE; this is reserved exclusively for connecting to the ION Sound Control app.
To reject an incoming call, press and hold the Play/Pause button. To control the volume of the caller, press the +/- buttons. To end a call and unpause Bluetooth playback, press the Play/Pause button. ION Audio Party Splash™ User Guide...
: Linking Two Speakers Note: In order to use Stereo-Link mode, you cannot have a Bluetooth device connected. If another Party Splash™ is connected to a Bluetooth device, disconnect by pressing and holding the Bluetooth button. PARTY SPLASH 1 - PRESS & HOLD...
1. Press the Radio button. The LED next to this button will light up when FM radio mode is activated. 2. Press and hold the +/- buttons to seek to the next or previous strongest station. To save a radio station as a preset, use the ION Sound Control app. See Operation > App Control for more information.
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You can find this under the Bluetooth menu in the Settings for your phone or other audio device. If this does not work, and you have connected to Party Splash before, find Party Splash in the list of available or previously connected devices in your audio device's Bluetooth menu, tap the "gear"...
** Battery life may vary based on temperature, age, and volume usage of product. Trademarks & Licenses ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by ION Audio is under license.
Page 16
i o n a u d i o . c o m Manual Version 1.1...