Table of Contents
Advertisement
MM5D91-00-InstallationGuide-D01
Design the coverage in floor plan is to decide the number of required radars for the coverage
area. The radar configuration, placement and mounting position are the parameters to
determine.
Distance estimation in side view is to analyze the estimated covered distance. The elevation
angle of each radar is set to 45 degree in order to achieve better sensitivity. Base on the tilted
angle, the line of sight from radar to ground floor is shorter than the horizontal distance.
Distance estimation in side view can help manufacturer to predefine the suitable detected
distance.
Pitfalls in installation environment is the unstable effect for presence detection. Small
vibration of different objects will easily trigger false alarm. The small vibration can be
quantified by the micro value in calibration mode. Special precaution should be made to avoid
the pitfalls.
©
Copyright
JORJIN TECHNOLOGIES INC. 2021
Page 3
http://www.jorjin.com.tw
CONFIDENTIAL
Advertisement
Table of Contents
