Table of Contents
Advertisement
MM5D91-00-InstallationGuide-D01
2.3. Steps to design coverage in floor plan
This section provides detailed procedures to design the radar configuration for covered range.
Microsoft PowerPoint is used as the tool for doing the estimation. An example design flow is
provided as below. The scale using is 1:50, which means 2cm represent 1m.
Draw a 1:50 scale block and place the floor plan in the block
1.
Figure 2-9. Floor plan measurement
2.
Select Shapes and choose Partial Circle to create the radar detected area. Set angle of
the partial circle from to 90 degree.
Figure 2-10. Radar coverage shape creation
©
Copyright
JORJIN TECHNOLOGIES INC. 2021
Page 9
http://www.jorjin.com.tw
CONFIDENTIAL
Advertisement
Table of Contents
