MM5D91-00-InstallationGuide-D01
3.1. Procedures of marco and micro level recording
Calibration mode provide the feature to print out and save the micro detection value over
time. Following procedures show the steps to do recording.
1. Open BGT60TR13C_Radar_Config_Tool. Select radar COM port and press Connect.
Figure 3-2. Radar config tool
2. Select Reset config in item and press Set.
Figure 3-3. Reset radar config
©
Copyright
JORJIN TECHNOLOGIES INC. 2021
Page 16
http://www.jorjin.com.tw
CONFIDENTIAL