General Assembly And Safety Information; The Model - Technical Features; Instructions For Operation; Locomotive Coupling At The Front - Brava G 4/5 108 Operating Instructions Manual

General assembly and safety information

• These operating instructions describe all work steps necessary for
• In the case of incorrect handling of electrical components, they
• In the case of maintenance work, the disassembly is described
• When dismantling the locomotive make a note of the mounted
The model – technical features
Decoder (optional depending on version)
– Address range 1-9999
– Complies with NMRA
– Quiet motor running with 18 kHz motor control
– 14, 27, 28, 148 stages depending on data format
– load-controlled
– Swiss loco signalling true to the original including shunting light
– Rear light can be switched individually for thrust operation
Sound
– Steam puffs synchronous with the wheels turning
– Optionally 2 or 4 exhaust puffs
– Load-dependent steam noise
– Sound module changeover to "moving without train"
– Cylinder drainage can be switched on
– Guard whistle and station announcement can be switched on
– Whistle can be switched on with variable duration
– Air pump
– Braking noise
– Flickering light control depending on "coal shovel" sound
– Steam generator controlled for vacuum brake
Operating instructions
The locomotive needs a very large space profile when operating
round narrow radii. Please check your system with regard to
hindrances such as platform edges, bridge rails or tunnel entrances.
Narrow radii should be avoided in the interests of operating safety.

Locomotive coupling at the front

The model can only be coupled to large radii at the front (because of
the large overhang in narrow radii).
G4_5_10000_10001.p65
maintenance and repair. Please read these operating instructions
carefully before you start with your work.
may be destroyed. Please ask your specialist dealer to help with
the necessary work (e.g. changing circuit boards).
below, to re-assemble the tractor reverse the work steps.
position of the individual parts. An incorrectly mounted part can
be destroyed or operation can be disrupted.
(3+3)
5
5
29.09.2005, 14:40