Switch On The Pcb - Brava G 4/5 108 Operating Instructions Manual

Maintenance works on the tender
9. Switch on the PCB (Fig. 7)
There are three switches on the PCB (05) marked as S6, S2 and S3.
To adjust these switches, the tender housing (03) has to be removed,
see point 1.
Switch S6: Slide control 1 to "ON" and 2 to "OFF",
Caution: The two switches must never be at "ON" or "OFF" together.
Switch S2: The words "Smoke" and "Fire Box" are printed on the PCB.
Switch S3: Changeover analog/digital
G4_5_10000_10001.p65
cab light switched with F0.
Slide control 1 to "OFF" and 2 to "ON",
cab light switched with F12.
Smoke "ON": switches the smoke generator to
continuous mode.
Smoke "OFF": switches the smoke generator to control
by a sound module.
Fire Box "ON": switches the flickering light in the boiler
to continuous mode.
Fire Box "OFF": switches the flickering light in the boiler
to control by a sound module.
Slide control to A: analog
Slide control to D: digital
2 4
24 29.09.2005, 14:40