Table of Contents
Advertisement
Rejecting calls
To reject an incoming call:
Wait until the headset or car kit rings.
Press and hold down the main function key on the EB-BHX70 headset until you hear
a low tone, or press the red end button on most car kits.
Transferring calls from handset to Bluetooth
If you make a call using your handset, you can transfer the call to your headset or car kit
once the call is connected.
Press the main function button on the EB-BHX70 headset, or the green call button on
most car kits.
The display reads Voice Call Bluetooth.
Alternatively, you can select Menu > Bluetooth. The display reads Transferring Audio
to Bluetooth, then changes to Bluetooth Audio Transfer Succeeded.
Note: If you transfer the call using the Menu, then the call is transferred to the default
audio device. See Selecting default audio device on page 105 for information
about selecting your default audio device.
Transferring a call from Bluetooth
If you make a call using your headset or car kit, you can transfer the call to your handset.
On the handset, select Menu.
Select H'held.
Using automatic redial
If a connection is unsuccessful, press Q when Ok is displayed.
To stop redialling, press Q when Cancel or C is displayed.
Using hotkey dialling
If you have set up hotkey dialling, you can press and hold a digit key to call contacts on
your Contacts List. As each entry in your Contacts List is stored in a numbered location,
press and hold the digit key relating to that location. To turn on hotkey dialling
see Enabling and disabling hotkey dialling on page 60.
®
headset or car kit
®
headset or car kit to handset
Voice calls
25
Advertisement
Table of Contents
