Table of Contents
Advertisement
The phone's WAP (Wireless Application Protocol) Browser enables
you to access Internet services supported by the network, such as
news, weather reports, sport etc.
Server Settings
Before you can access Internet services, your SIM must be data
enabled and the relevant configuration information, entered into the
phone.
These settings may have been pre-programmed for you by the
network operator.
Note: Modifying previously entered settings can cause failure of the
Browser.
1
From Idle mode press Q, select Browser > Browser Setting
> Server Setting and press Q
2
Two servers may be setup on the phone. Use e to select one
or other of the server settings and press Q
3
Use e to select Edit and press Q
A list of configuration parameters will be displayed. The parameter
Name will be highlighted and
4
Press Q
5
Enter the name of the WAP server and press Q twice
6
Use e to select each of the other parameters in turn, edit the
information and press Q twice
7
After all parameters have been entered, press B to return to
the previous menu level
8
Select the server setting that you have just edited and press
Q. Use e to select Set and press Q
Record your WAP settings in the table at the rear of this booklet
for easy reference.
WAP Browser
Edit
will be displayed.
WAP Browser
49
Advertisement
Table of Contents
