Table of Contents
Advertisement
Basic Operation
Switching the Phone On/Off
To switch the phone on or off.
Press and hold E to switch power on
A greeting will be displayed and then the phone will
go into Idle mode.
Press and hold E to switch power off
Making a Call
Ensure that the phone is switched on, the network operator logo is
displayed and the signal strength meter shows network coverage is
available in the current area.
1
Enter area code and phone number
2
Press D
International Dialling
Using the automatic international access code (+) you will be able to
dial international numbers without having to know the code for the
international exchange.
If the international number is known then it can be entered in the
normal fashion followed by the area code and phone number.
1
Press and hold 0 until + is displayed
2
Use e to cycle through the abbreviated
international names and press Q to select the
required code
3
Enter area code and phone number
4
Press D
Note: Many countries include an initial "0" in the area code. This
should, in most cases, be omitted when dialling international
numbers. If you have difficulties making international calls, contact
your Service Provider.
8
Basic Operation
Advertisement
Table of Contents
