Advertisement
Care & Cleaning
PART
Housing
Carafe Plate
Power Cord
Single-Serve Pod Coffee Adapter
Brew Basket
Glass Carafe Lid
Glass Carafe
Reusable Single-Serve Filter
Removable Filter Holder
Descaling with the Auto-Clean Function
After approximately 1–2 months of use, the clean LED indicator will illuminate, indicating that the appliance should
be cleaned/descaled. The clean LED is a warning and will not affect the appliance, but failure to regularly descale
your appliance will impact performance and could lead to irreversible damage. In areas with hard water, it may be
necessary to descale more frequently or run multiple descaling cycles.
To simplify cleaning, your appliance is equipped with an auto-clean function. To use the auto-clean function:
1. Prepare the descaling solution by combining 6 cups of white vinegar and 6 cups of cold water.
2. Fill the water reservoir with the cleaning solution. Place the carafe on the warming plate.
3. Press and hold the Brew/Off Button for 4 seconds.
4. The appliance will stop and start during the cleaning process. The cleaning process takes approximately
45 minutes. When the water reservoir is empty, the cycle will stop and the cleaning LED indicator will darken.
5. When the cleaning process is complete, discard the water in the Carafe.
6. After descaling, rinse the appliance: Run two 10-cup brew cycles with cold water only without ground coffee or
a paper filter (see the "Brewing a Carafe" section). When all the water has been brewed into the carafe, discard
the water in the carafe. Then, run two 10-oz single-serve brew cycles with cold water only (see the "Brewing
Single-Serve Pods" section). When all the water has brewed into the carafe, switch the coffee maker off and
allow the coffee maker to cool for 15 minutes. Discard the water from the carafe and rinse.
CLEANING INSTRUCTIONS
Wipe with a soft, damp cloth.
Wash by hand in warm, soapy water, or
wash in the dishwasher (top rack only).
13
Advertisement
