Advertisement
Instructions for Use
Brewing Single-Serve Pods
IMPORTANT:
Rest must be in the downward postion (C).
1.
Make sure your appliance is plugged in.
2.
Ensure the Water Reservoiris filled with a minimum of 20 ounces of
water. Do not fill the Water Reservoir past the "MAX "fill line.
3.
Open the hinged lid.
IMPORTANT:
only the pod holder. Do not use the removable mesh filter in
the appliance when using the pod function.
4.
Ensure the Pod Holder is installed properly in the Removable Filter
Holder. The tab on the Pod Holder should align with the groove on
the Filter Holder (D).
5.
Place the Filter Holder into the appliance, taking care to align the
tabs properly (E). Press down until you hear a click.
6.
Insert a coffee pod of your choice into the pod adapter (F). For
stronger coffee or when filling higher-capacity mugs, select the 8,
10, or 12 ounce setting and brew twice using two separate pods.
7.
Push the lid down firmly until it locks into place. This will puncture
the coffee pod and keep the filter basket's lid from opening
during brewing.
8.
Place your mug on the cup rest.
9.
Select your desired size, then press the Brew/Off Button once to
begin the brew cycle. The cup size indicator light will stop flashing
and the Single Indicator Light will illuminate bright blue.
To avoid the risk of personal injury or damage to
WARNING:
property, do not remove the mug from the appliance until the
brewing cycle is complete and the appliance is shut off. Never lift
the lid during the brewing cycle because scalding may occur.
10.
Once the brewing cycle is complete, the appliance will
automatically shut off.
11.
When cooled, carefully remove and dispose of the used pod.
The Carafe Plate will be hot after single-serve
WARNING:
brewing. Allow the appliance to cool before touching the Cup
Rest or Carafe Plate.
10
For the pod coffee system to work, the Cup
When brewing prepackaged coffee pods, use
C
D
E
F
Advertisement
