RCA RCTC4GB Read Me First

READ ME FIRST!
Follow these steps to get started with your remote control.
1
Plug the charging cable into
the charging jack on the
back/bottom of the remote.
Plug the other end into a
USB power source. The
red charging indicator
illuminates. The green
indicator illuminates when the
remote is fully charged.
4
Press and hold the device key you want to
program for about 2 seconds, until the POWER
key illuminates and stays on. Then release the key.
MENU
6
VOLUME
2
Manually turn on the device you want to control.
5
CH+ 0–
VOLUME
For more information, including instructional videos, remote programming codes, and
customer support, visit www.RCACodeSupport.com
To program the other device keys, follow these instructions again.
3
Find the Code List that came with the
remote. Locate the section for the type of
device you're trying to program, and find
your brand in that section. Circle the codes
for your brand and keep them handy.
If you don't see your brand listed, consult the
MENU
Owner's Manual for other programming options.
Enter the first five-digit code for your brand
in the code list (the POWER key flashes after
each digit).
Test commonly used keys with the device (for example, POWER,
VOL+, CH+, and 0 for a TV).
If these keys work, congrats! You've finished programming
for this key! If not, try steps 4 and 5 with the next code for your
brand in the code list.
RCTC4GB QSG 00 R341U1