Advertisement
Quick Links
IAP2300C Series
Industrial Wireless Client
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check the integrity of package and accessories while
first using the wireless client.
1.
Wireless Client
2.
DIN-Rail mounting attachment
3.
2.4G/5G dual-band antenna ×2
4.
Wall-mounting panel x 2
Note: 2E single-frequency device antenna (standard), and
2E2E dual-frequency device antenna (optional).
5.
Warranty card
6.
Certificate
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The products of this series are DIN-Rail/wall mounting
industrial wireless client. For convenience, the products of this
series adopt the following number on the left in this guide,
please affirm the number of your product.
Model I. IAP2300C-2E-2T-1D-P12_36 (2 2.4G/5G dual-band
antenna interfaces + 2 100M LAN + 1 RS-
232/485/422 serial port, 12~36VDC power input).
Model II. IAP2300C-2E2E-2T-1D-P12_36 (4 2.4G/5G dual-
band antenna interfaces + 2 100M LAN + 1 RS-
232/485/422 serial port, 12~36VDC power input).
Model III. IAP2300C-2E-5T-1D-P12_36 (2 2.4G/5G dual-band
antenna interfaces + 1 100M WAN + 4 100M LAN + 1
RS-232/485 serial port, 12~36VDC power input).
Model IV. IAP2300C-2E2E-5T-1D-P12_36 (4 2.4G/5G dual-
band antenna interfaces + 1 100M WAN + 4 100M
LAN + 1 RS-232/485 serial port, 12~36VDC power
input).
【Panel Design】
Model I
- 1 / 6 -
Model II
Advertisement
Related Manuals for 3onedata IAP2300C Series
Summary of Contents for 3onedata IAP2300C Series
- Page 1 IAP2300C Series Model I. IAP2300C-2E-2T-1D-P12_36 (2 2.4G/5G dual-band antenna interfaces + 2 100M LAN + 1 RS- Industrial Wireless Client 232/485/422 serial port, 12~36VDC power input).
- Page 2 Wall-mounting location hole DIN-Rail mounting kit Model IV Wall-mounting location hole RESET button DIN-Rail mounting kit Terminal blocks for power supply input RESET button RS-232/485/422 serial port Terminal blocks for power supply input 10/100Base-T(X) 100M LAN port (LAN1-LAN2) RS-232 serial port Device indicators, from left to right in turn they are: RS-485 serial port Serial port indicator (SERIAL)
-
Page 3: Din-Rail Mounting
Signal strength indicator (RSSI) Wireless network indicator (WLAN) Running status indicator (RUN) Grounding screw 2.4G/5G dual-band antenna interface (WIFI1-WIFI2) 【Mounting Dimension】 Unit: mm Model I, Model II Check whether the DIN-Rail mounting kit that comes with the device is installed firmly. Insert the bottom of DIN-Rail mounting kit (one side with spring support) into DIN-Rail, and then insert the top into DIN-Rail. - Page 4 terminal block into the device power supply interface, IO (Reserved) then plug the power supply plug contact and power on. Model III, Model IV Model III and IV of this series of Power OFF operation: First, remove the power plug, then ...
- Page 5 troubleshooting process. The function of each LED is device to the same network segment, and the 10/100Base-T(X) RJ45 interface described in the table below: network between them can be mutually accessed 10/100Base-T(X) RJ45 interface Indicate Description Serial Port RS-232/485/422 serial port adopts Enter device’s IP address in the address bar of the The device is powering on or the DB9 (Male);...
- Page 6 4.6W@12VDC, 4.8W@36VDC Full load at high temperature: 4.7W@12VDC, 5.1W@36VDC Model III No-load at normal temperature: 2.1W@12VDC, 2.5W@36VDC Full load at normal temperature: 5.5W@12VDC, 5.7W@36VDC Full load at high temperature: 5.5W@12VDC, 5.7W@36VDC Working Environment Working -40℃～75℃ Temperature Storage -40℃～85℃ Temperature Working 5%～95% (no condensation) Humidity Protection...