IAC8500-1GC4GT
Industrial Wireless Controller
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Shenzhen
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check the integrity of package and accessories while
first using the wireless controller.
1
Wireless controller x1
2
3
Power line x2
4
5
Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it asap.
【Product Overview】
The product is industrial wireless controller with high stability
and
cost-effectiveness.
IAC8500-1GC4GT-2P110_240VAC (1 Gigabit Combo WAN
port + 4 Gigabit RJ45 LAN ports, dual power supply
110~240VAC).
【Panel Design】
Front View
Rear View
1.
2.
3.
4.
5.
6.
7.
Nanshan
District,
8.
9.
10.
11.
12.
13.
14.
15.
Mounting lug x2
【Mounting Dimension】
Warranty card
Unit: mm
The
model
is
Gigabit LAN port
Gigabit LAN port status indicator
Gigabit Combo WAN port (RJ45 or SFP)
Gigabit Combo WAN port status indicator
Console port (Reserved)
USB3.0
USB2.0
Relay output terminal
RESET restoring factory setting button
Device running indicator RUN
Device power supply status indicator PWR1/PWR2
Relay alarm indicator ALM
Lugs
AC power input outlet
Grounding screw
Note before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【Rack-mounted】
Step 1
Select the device mounting location to ensure
enough size.
Step 2
Adopt bolts to install the mounting lugs in the
device position as figure below.