Hardware Functionality; Sim Card Slots; Sim Cards Insertion - Advantech ICR-2531 User Manual

Lte industrial router

Hide thumbs Also See for ICR-2531:

Table of Contents

2. Hardware Functionality

See Chapter

1.3

for the product hardware overwiew. Table

hardware, including the links to the chapters with a detailed description.

Slots for two SIM cards are located on the router under a metal cover. If you intend to use

this device to communicate over a cellular network, please place an activated data-provisioned

SIM card into the SIM card reader.

You can install two SIM cards simultaneously to utilize the switching feature. The SIM cards

may have different APNs (Access Point Names) adjusted. The SIM card changing procedure

is described below. Enter the PIN in the router's web interface if the PIN is required for the

SIM (Administration -> Unlock SIM Card).

Type of SIM card: Micro SIM (3FF) 15.0 x 12.0 x 0.76 mm.

Inserting the SIM card:

• Always disconnect the router from the power supply before handling the SIM card.

• Unscrew two screws on the SIM card cover and remove the cover.

• To remove an inserted SIM card, use the flat end of a spudger, or your fingernail,

press the SIM card slightly into its slot until you hear a click. After hearing this click,

release the card, and it will pop out of its slot.

• To insert a SIM card push card into the slot until it clicks into place.

• Place back the cover and fix it by two screws.

Figure 11: SIM Cards Insertion

ICR-2531

lists a short description of the

Table of Contents