Shark QS100Q Series Quick Start Manual

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A Handheld Vacuum
B Wand
C
Floor Nozzle
D Onboard Storage Clip
ASSEMBLY
A
(Click)
B
(Snap)
(Click)
C
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
QS100Q_QSG_MP_Mv2
ULTRALIGHT PET CORDED STICK VACUUM
E Pet Crevice Tool
F Upholstery Tool
G
Precision Duster
Attach the onboard storage
clip (D) onto the wand and
place accessories on the
holder.
D E
F G
When storing, wrap cord
around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
EMPTYING THE DUST CUP
Empty the dust cup after each use.
FLOOR NOZZLE MAINTENANCE
Debris Intake Access
Check the debris intake
and clear away any dirt
or blockages. To close the
debris intake, press down
on each side until it clicks
into place.
TIPS
For compact storage,
hang the handheld vacuum
from the storage hook
on the wand.
MAINTENANCE:
Rinse pre-motor filters
once a month and
post-motor filter once
every 9 months. Rinse
with cold water only.
Allow filters to air-dry
completely before
reinstalling.
See enclosed Owner's
Guide for more
information on how
to clean and replace
the filters.
Brushroll
Remove any debris or
hair wrap carefully with
your hands or scissors.
© 2021 SharkNinja Operating LLC.