DO NOT allow the appliance cleaner. Store your vacuum cleaner FRAGRANCE CARTRIDGE FIRST AID 23. Your Shark® vacuum may not to be used by children. DO NOT allow with the power cord secured around be designed to stand up on its own.
Page 3
ASSEMBLY SETTINGS (Click) (Click) CONTROLS POWER BUTTON The control panel is located on the Power Button 1. Insert Wand into Floor Nozzle. 2. Insert Handheld Vacuum into wand. back of the handheld vacuum. Press the Power button to begin vacuuming. Press again to turn off power.
Page 4
TECHNOLOGY SETTINGS ODOR NEUTRALIZER TECHNOLOGY SETTINGS ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM NOZZLE CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise in the dial Flip up the dial handle and rotate the odor dial until the two teal arrows are aligned.
CLEANING MODES STORAGE MODE HANDHELD STORAGE HOOK Storage Hook Storage FLOOR MODE ABOVE-FLOOR WITH WAND Hook To clean floors, step on floor nozzle For more reach, detach the wand. Stand and tilt handheld vacuum back. the vacuum upright, step on the Foot Pedal on the side of the nozzle, and pull up the wand to detach.
MAINTENANCE AVAILABLE ACCESSORIES IMPORTANT: Unplug the vacuum before performing any maintenance. NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top inside flap of the box. To order additional accessories, visit sharkaccessories.com. EMPTYING THE DUST CUP Crevice Tool This slim tool is great for cleaning in tight...
MAINTENANCE MAINTENANCE CHECKING FOR BLOCKAGES IMPORTANT: Unplug the vacuum before performing any maintenance. CLEANING FILTERS Regularly rinse and replace the filters to maintain your vacuum's suction power and to maximize the effectiveness of odor neutralizer technology. To prevent damage from cleaning chemicals, rinse filters with cold water only. Do not use soap. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts.
TROUBLESHOOTING MAINTENANCE SELF-CLEANING BRUSHROLL MAINTENANCE Power cord caught in brushroll or floor nozzle. • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If any hair is wrapped around the brushroll, If this occurs, immediately shut off power to the vacuum and remove the cord from the continue vacuuming, using Carpet mode brushroll or nozzle.
We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and 2. Manufacturer: Shark Ninja 89 A Street Needham, MA 02494 packing instruction information.
Page 10
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® STRATOS™ Corded Stick Vacuum with DuoClean® PowerFins,™ HairPro,™ and Odor Neutralizer Technology. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 sharkclean.com...
Need help?
Do you have a question about the STRATOS QS3000Q Series and is the answer not in the manual?
Questions and answers
How do I get another set up for the odor filter?
You can purchase a replacement odor filter for the Shark STRATOS QS3000Q Series by visiting qr.sharkclean.com/odortech.
This answer is automatically generated