Table of Contents
Advertisement
Semi Automatic
Duplex printing
The Semi Automatic Duplex option allows you to print on two sides of a
single page.
The procedure for Semi Automatic Duplex printing varies depending on
whether your printer has a hard disk installed. If your printer has a hard disk
drive installed and the Semi Automatic Duplex option is selected, the printer
spools and prints all even-numbered pages in a job and, when the
Continue/Forward button is pressed at the printer, prints all odd-numbered
pages in the job. If your printer does not have a hard disk drive and this
option is selected, the printer prints an odd-numbered page and, when the
Continue/Forward button is pressed, prints the subsequent even-numbered
page in the job.
Follow the procedure outlined below to use the Semi Automatic Duplex
option.
To print using the Semi Automatic Duplex option:
1
Select the Semi Automatic Duplex option in the
KX-P8420 printer driver.
2
Print a document by selecting Print from the
application's File menu.
The odd-numbered pages are printed.
3
When Insert printed pages in MP tray, press
Continue appears in the LCD, load the printed odd
pages from the job face down and bottom first in the
multi-purpose tray.
4
Press the Continue/Forward button on the front panel
to print the even-numbered pages on the opposite side
of each page in the multi-purpose tray.
If the printer does not have a hard disk drive, the next odd-
numbered page is printed automatically; repeat steps 3 and 4 for
every even-numbered page in the print job.
NOTE:
•
When the printer does not print the even-numbered pages after a
press of Continue/Forward button, remove the odd-numbered
pages and reload them in the multi-purpose tray.
23
Advertisement
Table of Contents
