Related Manuals for Robot Coupe CL 55 E
Summary of Contents for Robot Coupe CL 55 E
- Page 1 CL 55 Robot Coupe U.S.A., Inc. 264 South Perkins St., Ridgeland, MS 39157 Phone : 800/824-1646 • 601/898-8411 • Fax: 601/898-9134 e-mail: info@robotcoupeusa.com • website: www.robot-coupe.com 30/10/2019...
- Page 2 www.robotcoupeusa.com Register your product online We reserve the right to alter at any time without notice the technical specifications of this appliance. None of the information contained in this document is of a contractual nature. Modifications may be made at any time. ©...
- Page 3 •This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and...
-
Page 4: Table Of Contents
CONTENTS WARRANTY CHOOSING THE RIGHT DISC IMPORTANT WARNING CLEANING INTRODUCTION TO YOUR NEW MAINTENANCE VEGETABLE PREPARATION MACHINE • Motor seal CL 55 "E" Version • Blades and plates SWITCHING ON THE MACHINE • Grating discs FUNCTIONS OF HOPPERS TECHNICAL SPECIFICATIONS AND THEIR TOOLS •... - Page 5 ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY THE FOLLOWING ARE NOT COVERED Commercial equipment use is defined as but not limited to the preparation of food substance within the confines YOUR NEW ROBOT COUPE COMMERCIAL UNDER WARRANTY: of a restaurant/facility, that is sold and consumed within PRODUCT IS WARRANTED TO THE said restaurant/facility.
-
Page 6: Important Warning
(e.g., containing too much caustic soda or INSTALLATION ammonia). 15“ 12“ • Robot Coupe can in no way be held responsible for 16“ the user’s failure to follow the basic rules of cleaning 15” • Install your machine on a clean and level floor and hygiene. -
Page 7: Introduction To Your New Vegetable Preparation Machine Cl 55 "E" Version
INTRODUCTION TO SWITCHING ON Two types of tool are designed for the lever-type hopper: THE MACHINE YOUR NEW VEGETABLE 1) The loading cone, which guides PREPARATION MACHINE the vegetables (except for cabbage) Before plugging in, check that your power supply towards the blades. -
Page 8: Automatic Feed Head
STRAIGHT AND SLOPING TUBES HOPPER Two types of tool are designed for the lever-type With the motor unit hopper: facing you, slot the This hopper consists of black discharge disk or 1) The agitator, which guides the two straight tubes with white ejection tool onto a diameter of 75 mm vegetables (except for cabbage) -
Page 9: Installing The Hoppers
Place the dicing grid in Position the French fries Screw the tool (unless you are using the removable grid in the vegetable partition) firmly onto the motor shaft. the bowl of the vegetable preparation bowl. processor. Check that it is correctly INSTALLING Make sure that the spur on positioned with the French... -
Page 10: Tubes Feed Head
Slide the hinge pin Slip the hinge pin into Insert the pusher feed- the locations provided into the hinge rings head into the feed tube at the back of the motor provided at the back of and turn it until the plastic base. -
Page 11: Choosing The Right Disc
CHOOSING DICE W A R N I N G THE RIGHT DISC D 5x5 carrot /zucchini / cucumber / celeriac Use caution handling disk. potato / carrot / zucchini / beet root D 8x8 Always use cutting gloves. Knives are sharp. SLICERS D 10x10 potato / carrot / zucchini / beet root / turnip / onion / apple... -
Page 12: Maintenance
The CL 55 is fitted with magnetic safety system TECHNICAL I M P O R T A N T which stops the motor as soon as the large hopper SPECIFICATIONS Check that your detergent is suitable for or lid is opened, thus preventing any access to the cleaning plastic parts. -
Page 13: Service
SERVICE See warranty first then; Should your unit requires service, check with your distributor to see where local service is available. If not or if you wish your unit to be serviced at the factory, call for return instructions and ship the unit prepaid to our factory address. - Page 14 TECHNICAL DATA DATOS TÉCNICOS DONNÉES TECHNIQUES 30/10/2019...
- Page 15 30/10/2019...
- Page 16 Robot Coupe U.S.A., Inc., 264 South Perkins St., Ridgeland, MS 39157 Phone: 800/824-1646 • 601/898-8411 Fax: 601/898-9134 e-mail: info@robotcoupeusa.com website: www.robot-coupe.com...
Need help?
Do you have a question about the CL 55 E and is the answer not in the manual?
Questions and answers