Advertisement
b) If spray in a downward direction, the angled
end of the suction tube should be pointing
towards the front of the gun.
4-3) Pour material into container, make sure not to
exceed 800ml
4-4) Remove the motor
a) Hold the gun with your hand and press the latch in
the direction of the arrow.
b) At the same time hold the motor handle with your
hand and rotate it counter clockwise 90°.
c) Pull out to remove the motor from the gun.
4-5) Connect gun body with motor.
a) Hold the gun with your hand to align the slot on
the gun with the slot on the motor and insert it
(as shown in the figure).
b) Hold the motor handle with your hand, rotate it
right hand clockwise 90°.
c) When the gun and host are parallel, it is locked.
Suction Tube
Advertisement
