Advertisement
4. How to Use:
Before using the electric spray gun, material preparation is the first stage.
Please refer to the thinning chart and picture.
Material
Oil Enamel
Oil based primer.
Oil stain
Clear sealer
Polyurethane
Varnish
Lacquer sanding sealer
Lacquer
Automotive finishes
Latex
4-1) Unscrew the paint container from the spray gun.
4-2) Adjust the suction tube.
a) If spray in in upward direction, the angled
end of the suction tube should be pointing
toward the rear of the gun.
Run out time (Sec)
25-60
30-60
no thinning required
no thinning required
no thinning required
20-60
25-35
25-35
20-40
45-90
Suction Tube
Advertisement
