Panasonic KX-P8415 Maintenance Manual page 49

Settings and Printing
Error Message
Oil Roll
Not installed
Oil Roll
Worn out
Oil Roll wearing out
Option feeder
Incompatible
Output Tray
Full
Overrun
Paper feeder
Not installed
Paper Tray
Empty
Paper Tray
Not installed
Too hot to print Label
Remove Label, Cancel job
Transfer wearing out
Transparency Tray
Empty
Transparency Tray
Not installed
Upper Left side door
Open
Maintenance
Possible Cause
Oil supply roll is not installed.
Oil supply roll is worn out.
Oil supply roll is wearing out.
An incompatible 2nd cassette
feeder is installed.
Output tray is full.
Overrun error
Paper feeder is not installed.
No media tray is installed or
media tray is empty.
Paper tray is not installed.
The printer is too hot or room
temperature is too high to print
Labels.
Transfer unit is wearing out.
Transparency tray is empty.
Transparency tray is not
installed.
Standard cassette side door is
open.
Specifications
Install the oil supply roll.
Replace the oil supply roll
now.
Replace the oil supply roll
soon.
Replace the 2nd cassette
feeder with the one
compatible with this model.
Remove the printed media
from the output tray.
Check on the Page Protection
check box in the Setup tab.
Install the paper feeder.
Install a media tray with paper
in it.
Install the paper tray.
Wait until the printer cools
down, or use in a cooler place
[below 35°C (95°F)].
Replace the transfer unit and
reset the counter
Printer Panel (Menu Mode)" in
Settings and
Install the transparency tray
with transparencies in it.
Install a transparency tray.
Close the left side door.
Contents
Error Messages
Corrective Action
(see "Using the
Printing).
49