Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MicroNet T262-T21D
Summary of Contents for MicroNet T262-T21D
- Page 1 User Guide AX1500 Wi-Fi 6 Router T262-T21D...
- Page 2 • Specifications: WiFi Standard: IEEE802.11b/g/n IEEE802.11a/n/ac/ax Interface: 1 WAN 3 LAN • Environment Rated Power Input: 12VDC, 1A Operating Temperature: 0-40℃ Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
-
Page 3: Safety Instruction
Safety Instruction 1.WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. The device shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 2.WARNING: the power plug/direct plug-in adpater is used as disconnect device, the disconnect device shall remain readily operable. -
Page 4: Fcc Warning Statement
FCC Warning Statement FCC Radiation Exposure Statement: The antennas used for this transmitter must be installed to provide aseparation distance of at least 20cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Page 6: Connect The Router
1. Connect the Router Connect the router's WAN Connect the port with the modem’s Power off or Ethernet LAN port with unplug your 1.1 The first step to start configuring your router is cable the Ethernet modem to plug it in and then connect a network cable cable （RJ45）... - Page 7 2. Indicator LED Status Description The router is power off The router is power on but Internet is not working Green The router is already connected to the internet Green Flashing WPS or Mesh pairing...
- Page 8 3. Connect Device to the Router 3.1 Wireless Activate the Wi-Fi on your smartphone or notebook, connect to the router's 2.4GHz or 5GHz network with the SSID provided at the bottom of the router and enter the IP address 192.168.10.1 in any browser; •...
- Page 9 4. Configure your router via Web Open the mobile phone or computer browser, visit the 192.168.10.1 website, enter the default Username and Password on the label at the bottom of the router, then you can enter the router management page. When the router is configured for the first time, it will automatically enter the Install page (setup wizard).
- Page 10 5. WAN Access Type 5.1 DHCP: For Cable/DSL/Broadband connection which makes your computer immediately online without any setting or signing-in. 5.2 Static IP: You are provided with specified IP parameters by your ISP. 5.3 PPPOE: Usually for ADSL Modem and you are provided with a PPPoE username and password by your ISP.
- Page 11 6. Mesh pairing If you have purchased two or more AC1200 units, follow the steps below to perform the MESH pairing between the routers and enjoy a connection with a wide signal range. 6.1 Mesh pairing One button 6.1.1. Before turning on the second (Agent) router, make sure that the first (Controller) router connected has internet access and is fully configured;...
- Page 12 6.2 Mesh Unpairing • You can unpair the meshed router by restore the router to its factory default settings. • For resetting router, press and hold the RESET button more than 8 seconds then release , the LED will start to blink and change into red.
- Page 13 7. FAQ Q1: What should I do if I can't access the router’s management page? • Reboot your router and try again. • Check your Wi-Fi connection. • Use another Web browser such as Google Chrome. • Restart your device. Q2: What should I do if I can't access Internet? •...
- Page 14 Manufacturer Information ：Micronet Union Technology(Chengdu) Co., Ltd. Address: Room 502, Building 5, No. 528, Yuefei Road, Shibantan Street, Xindu District, Chengdu, Sichuan, China...
Need help?
Do you have a question about the T262-T21D and is the answer not in the manual?
Questions and answers