Table of Contents
Advertisement
ALM100 User's Manual
1.3 ALM100 Accessories
Maretron offers the following accessories for the ALM100:
• CP-WH-ALM100
1.4 Quick Install
Installing the Maretron ALM100 involves the following five steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 2.1)
2. Choose a mounting location (Section 2.2)
3. Mount the ALM100 (Section 2.3)
4. Connect the ALM100 (Section 2.4)
5. Configure the ALM100 (Section 2.5)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron ALM100, you should find the following items:
1 – ALM100 Alarm Module
1 – ALM100 Black Faceplate
2 – ALM100 Mounting Screws
2 – Faceplate Mounting Screws
1 – Faceplate Gasket
1 – Sounder Volume Control Baffle Plate
1 – Sounder Volume Control Shutter
1 – Screw for Sounder Volume Control
1 – Sounder Collar
1 – Sounder Gasket
1 – ALM100 User's Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
Please consider the following when choosing a mounting location.
1. The ALM100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the ALM100 can be mounted on a horizontal deck,
vertical bulkhead, or upside down if desired.
3. The ALM100 is temperature-rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.
Page A2
ALM100 White Faceplate
Appendix A – NMEA 2000 Interfacing
Revision 1.1
Advertisement
Table of Contents
