Maintenance - PROFECO MG12 Instruction Manual

Inserting the felt wheel
1. Place the mandrel in the collet as described above and make sure that the
screw nut is tightened, and the collet is secure.
Set a suitable rotation speed:
Speed
1-3
4-5
5
6
MAX
Note:
Store the accessories in the original box or keep the accessories components
elsewhere to protect them from damage.
Store the accessories in a dry place and away from corrosive media.

Maintenance

Always remove the battery before carrying out any work on the device.
Care and cleaning
Keep the ventilation openings free and clean the product regularly. Only clean the
housing with a damp cloth - do not use solvents! Then dry well.
Please note!
If anything, unusual happens during use, switch the device off and remove the
battery. Inspect and repair the device before using it again. Repair of the device
should only be carried out by a qualified repair person.
Repair or maintenance by unqualified personnel may result in risk of injury.
Use only identical spare parts to repair the tool.
Please note!
Ensure that the batteries are charged with the correct charger recommended by the
manufacturer.
Attention!
After a long storage period, the battery capacity will decrease.
To preserve the capacity of the batteries, we recommend storing only fully charged
batteries and topping them up from time to time. They should be stored in a dry and
frost-free place; the ambient temperature should not exceed 40⁰C.
Storage
Keep the machine, operating instructions, and any accessories in the original
packaging. In this way, you will always have all the information and spare parts to
hand. Pack the unit securely or use the original packaging to prevent damage during
transport.
Always store the unit in a dry place.
Material to be processed
Plastics and materials with low melting point
Stone, ceramics
Softwood, metal
Hardwood
Steel
27