Intended Use - PROFECO MG12 Instruction Manual

WARNING! When using tools supplied with batteries, basic safety measures
must be observed to prevent fire risk, electrolyte leakage and personal injury,
including the following precautions:
- Make sure that the battery block is suitable for the tool.
- Make sure that the outside of the battery pack is clean and dry before
connecting it to the charger.
- Ensure that the battery pack is charged with the correct charger recommended
by the manufacturer. Improper use may result in a risk of electric shock,
overheating or corrosive liquid leaking from the battery pack.
- Avoid contact with skin if electrolyte leaks. In case of leakage, wipe with a
cloth. If the liquid comes into contact with the skin, rinse abundantly with
water. In case of reaction or contact with eyes or mucous membranes, consult
a doctor.
• Make sure the device is properly switched off before you insert the battery.
Inserting a battery into a powered device may cause accidents.
• Only use the device with the type of battery specified in the operating
instructions. Using any other type of battery may present a serious risk of
injury or fire.
• Keep the battery away from metal objects such as drums, coins, keys or
other small metal objects that can make a connection from one terminal to
another. Short circuiting the terminals of batteries may cause burns to the
user and fire.
- Disposing of batteries
Make sure the battery is disposed of properly:
• Do not throw it away
• Don't burn it
• Do not throw it in a river
• Dispose of it in the designated collection containers

Intended use

The machine is intended for drilling, grinding, polishing, milling and brushing, and
other work such as engraving, cutting and derusting is also possible.
21