All Group/Program/Random Play - Panasonic SC-HT822 Operating Instructions Manual

Convenient functions
DVD
TV
DVD VHS
DVD
DISC 1 DISC 2
DISC1-
1 2
DISC5
DISC 4 DISC 5
4 5
PICTURE MODE
Numbered
7 8
ENTER
buttons SETUP
100 0
SKIP
OPEN/CLOSE/EJECT
TOP MENU
NAVI
DIRECT
NAVIGATOR
ENTER
ENTER
OSD/
DISPLAY
TV VOL
RESET PAGE
TV/VIDEO GROUP
MULTI RE-MASTER C.S.M
SUBWOOFER LEVEL SFC
POSITION
MEMORY ZOOM
PROG SPEED
SLEEP
SHIFT PL
SHIFT

All group/Program/Random play

While stopped, press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
All group ([DVD-A])>Program> Random>off (Normal play)
^------------------------------------------------------------------------}
[VCD] [CD] (There is no on-screen display.)
(PGM)>1-DISC (RND)> A-DISC (ALL RND)
^------------ off (Normal play) (---------}
To exit
Press [PLAY MODE] several times while stopped.
≥Disable HighMAT disc play to use random and program play. Select
"Play as Data Disc" in Other Menu (➜ page 29).
All group play
[DVD-A]
Press [1] (play).
Program play (up to 24 items)
[VCD] [CD]
You can program all the items on
discs.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
You can program all the items on a
disc in the play position.
1
[VCD] [CD]
Press
[SHIFT]i([DISC1]–[DISC5]).
2
Press the numbered buttons to select
the items (
[WMA] [MP3] [JPEG]
[ENTER]).
e.g. [CD]
Disc No. Track No. Program No.
≥To select a 2-digit number
e.g. 23: [S10] ➜ [2] ➜ [3]
RQT7708
[WMA] [MP3] [JPEG] [2] ➜ [3] ➜ [ENTER]
24
≥Repeat this step to program other items.
INPUT SELECTOR
DVD/VHS FM/AM
TV TUNER
DISC 3
3
CH
6
VOLUME
9
S10
SLOW/SEARCH
JET REW CD MODE
See below and the following page for details.
MENU
PLAY
LIST
RETURN
TV VOL
MIX 2CH REPEAT
SUBTITLE PLAY MODE
PLAY MODE
C.FOCUS PROGRESSIVE
SUPER SRND MUTING
QUICK REPLAY REC
CANCEL
TEST
AUDIO CH SELECT
CANCEL
e.g. [DVD-V]
P ro g ra m P l ay
Choose a title and chapter.
No. Title Chapter Time
1
to select and press
ENTER
then press
PGM
TRK
REPEAT
All group/Program/Random play
PLAY MODE
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
≥[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
To select an item using the cursor buttons
Press [ENTER] and [3 4] to select an item, then press
[ENTER] again to register.
All the items in the selected disc, title or group are selected
when you select "ALL".
3
Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
Press [3 4] to select an item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
Press [3 4] to select an item.
1
Press [CANCEL] (or press [3 4 2 1] to select "Clear" and
2
press [ENTER]).
Play
Clear To clear the whole program
Clear all
[VCD] [CD]
Press [∫] so "CLEAR" is displayed.
[DVD-A] [DVD-V] [WMA] [MP3] [JPEG]
to start
PLAY
Press [3 4 2 1] to select "Clear all" and press [ENTER].
[Note]
≥[DVD-V] [WMA] [MP3] [JPEG]
Times are not displayed while programming.
≥[VCD]
[CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE]
or move the disc out of the play position.
[VCD] [CD] The program is retained in memory.