Shuttering removal / Concrete-tile pool and Concrete-liner pool ....6 Installation / Concrete-tile pool............... 6 Installation / Concrete-liner pool ..............7 Installation / Pre-fabricated pool ..............8 Pipework Diagram..................9 Spare parts list rio Air bubbler............10 Concrete-tile pool................... 10 Concrete-liner pool..................11 Pre-fabricated pool..................12 rio Luftsprudler Schmalenberger GmbH + Co.
Under no circumstances must the rio Air bubbler be used in a way that exceeds the figures quoted in the technical specification. In case of doubt, please contact your customer ser- vice or the manufacturer.
Unit Description / General Technical Data The system complies with VDE (Association for Electrical, Electronic & Information Technologies) regulations. The rio Air bubbler is delivered as 3 assemblies: Installation kit Assembly kit Blower installation kit Technical Data rio Air bubbler...
The upper edge of the cover plate (02) must be flush with the raw concrete. Fasten the installation kit (03) to the concrete reinforcing bars in this position. Important: Before the concrete is poured the installation kit (03) must be fitted horizontally and true to dimensions in such a way that it cannot move.
the installation level by putting the air pad (08) in place. Lock the adjusting nuts (Q) with lock nuts (10) and fasten the air pad (08) to the adjusting nuts (Q) with the screws (16). In tiling up to the air pad (08) please watch the expansion gap. Installation / Concrete-liner pool 8108 8109...
Installation / Pre-fabricated pool Pre-fabricated pool Stay bolt Adjusting nut Installation kit Assembly plate Air pad Lock nut Threaded rod Clamp ring Clamp gasket Holding flange 8110 fig. 5 Cut a rectangular section measuring 340mm x 590mm out of the pool wall. With the help of the template, drill holes with d = 9mm for the stay bolts (G).
Pipework Diagram 8084 8085 fig. 6: Suggestion for the rio bubbler fig. 7: When blower accessories are 250mmx500mm fitted (schematic diagram) (4 connections in a row) Delivery rate per connection: 60m³/h Drain pipe Blower Shut-off unit 31/32 Fine filter / muffler Non-return valve Heat-resistant pipe Blower, P = 2.9 kW...
Ersatzteilliste / Liste des pièce detachées / Spare parts list Ersatzteilliste rio Luftsprudler / Liste des pièces detachées rio Bain bouillonnant / Spare parts list rio Air bubbler Betonbecken gefliest / Bassin béton-carrelage / Concrete-tile pool 8111 Abb. 8 Pos. Best. Nr.
Ersatzteilliste / Liste des pièce detachées / Spare parts list Betonbecken mit Folie / Bassin béton-liner / Concrete-liner pool 8112 Abb. 9 Pos. Best. Nr. Bezeichnung Désignation Description Stck. Bemerkung No. de réf. Nbre. Remarque Order No. Qty. Remark 55723 Stellmutter Ecrou de serrage Adjusting nut...
Ersatzteilliste / Liste des pièce detachées / Spare parts list Fertigbecken / Bassin préfabriqué / Pre-fabricated pool 8113 Abb. 10 Pos. Best. Nr. Bezeichnung Désignation Description Stck. Bemerkung No. de réf. Nbre. Remarque Order No. Qty. Remark 55723 Stellmutter Ecrou de serrage Adjusting nut 57722 Luftsprudelplatte...