Pro-Ject Audio Systems MaiA DS3 Instructions For Use Manual

Pro-Ject Audio Systems MaiA DS3 Instructions For Use Manual

Hide thumbs Also See for MaiA DS3:

Advertisement

Quick Links

INSTRUCTIONS FOR USE
Pro-Ject MaiA DS3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MaiA DS3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Ject Audio Systems MaiA DS3

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject MaiA DS3...
  • Page 2: Safety Instructions

    Connect the low voltage plug from the power supply to the Power 38V DC socket of the unit before connecting the power supply to the mains. MaiA DS3 can be switched on and off by using 2 different methods which are equal in priorities.
  • Page 3 The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby mode. The blue LED on the front panel shows that the unit is powered on. If a trigger signal is present MaiA DS3 can’t be switched off by the pushbutton.
  • Page 4: Dsd Playback

    Connect the headphones to the ¼“ (6,3mm ) jack socket on the front of the unit. Once headphone jack is connected into the socket, rear panel outputs are muted. +6dB button gain of the preamplifier for all inputs is increased by 6dB if pressed © Pro-Ject Audio Systems · MaiA DS3 · Revision 12.09.2022...
  • Page 5: Remote Control

    Pairing with Android devices Open Settings and turn on BT. Start a Scan for BT devices. Searched devices will show up. Tap on "MaiA DS3" and confirm presented pairing code on your Android device. When the connection was successful, the LED of Input 9 lights up continuously.
  • Page 6: Replacing Batteries

    <0.5W Replacement battery remote control: 2x AA 1,5V Dimensions W x H x D (D with sockets): 206 x 71 x 240 (252) mm Weight: 1850 g without power supply © Pro-Ject Audio Systems · MaiA DS3 · Revision 12.09.2022...
  • Page 7: Warranty

    To maintain compliance with FCC´s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Contains FCC ID: 2AWO-FSCBT1026 © Pro-Ject Audio Systems · MaiA DS3 · Revision 12.09.2022...
  • Page 8: Ec Declaration Of Conformity

    EC regulation 1275/2008 and its framework directive 2009/125/EC for energy related products (ErP) according to the test performed under the following technical standard EN 50564:2011 Pro-Ject Audio Systems a division of Audio Tuning GmbH 1050 Vienna, Austria, Margaretenstrasse 98 info@project-audio.com © Pro-Ject Audio Systems · MaiA DS3 · Revision 12.09.2022...

Table of Contents