Multi-Use Slicer - SEVERIN AS 3915 Instructions For Use Manual

GB

Multi-use slicer

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked
on the rating label of the appliance. This
product complies with all binding CE
labelling directives.
Familiarisation
1. On/Off switch
2. Thickness selection knob
3. Ham-cutting blade
4. Serrated blade
5. Central locking screw
6. Sliding tray
7. Power cord with plug
8. End-piece holder with finger guard
9. Stop plate
10. Rating label (on underside of the unit)
Important safety instructions
∙ In order to avoid hazards,
repairs to this electrical
appliance or its power
cord must be carried out
by our customer service.
If repairs are needed,
please send the appliance
to our customer service
department (see appendix).
∙ Before cleaning the
appliance, ensure it is
disconnected from the
power supply and has
cooled down completely.
∙ To avoid the risk of electric
shock, do not clean the
appliance with water and
do not immerse it in water.
∙ The appliance must be
cleaned regularly. For
more detailed information,
please refer to the section
Cleaning and care.
∙ We strongly recommend
that the appliance is only
9