Table of Contents
Advertisement
3. Hardware Installation
Two network ports have been provided on the PMA-2000 with in-built switching function.
The Management Network cable from the cinema control room is first connected to one
of these network ports and then routed to the single hall manageable switch via the other
network port. In this setup, the PMA-2000 is available on the network in case of power
failure to the single hall switch.
GDC PMA-2000 INSTALLATION MANUAL
Figure 4: Connectors on the PMA-2000
Figure 5: Network Ports on the PMA-2000
- 9 -
th
November 13
, 2020
Advertisement
Table of Contents
