Table of Contents
Advertisement
INTENDED USE
This mitre saw is intended for cutting wood and analogue materials, it is suitable for
straight and curved cuts having Mitre angles of up to 45° . The saw is not designed
for cutting firewood. Do not use machines, tools and accessories for additional
applications (see manufacturer' s instructions) for works other than those for which
they are designed for. All other applications are expressly ruled out.
NOT INTENDED USE
If not intended use, the risk of fire, electric shock and personal injury maybe further.
• The provisions contained in this guarantee are not intended to limit, modify, take
away from, disclaim or exclude any statutory guarantee set forth in any applicable
provincial or federal legislation.
SPECIFICATIONS
TECHNICAL DATA • Voltage : 220-240V ~ 50Hz
• Power rating: 1500W
• No-load speed : 4800 /min
• Blade size : Ø216mm x 48T
• LpA sound pressure level .....................97 dB(A)
KpA uncertainty ...........................................3 dB(A)
• LWA sound power level ..........................108 dB(A)
KWA uncertainty .............................................3 dB(A)
Noise information
The noise emission and its uncertainty measured in accordance with EN62841-1.
Wear hearing protection! The noise figures quoted are emission levels and actual
use of the power tool can differ from the declared are not necessarily safe working
levels.
Vibration
WARNING!
– the vibration emission during actual use of the power tool can differ the total value
of depending on the different ways in which the tool is used; and avoid vibration risk
suggestion:
1) wear glove during operation
2) limit operating time and shorten
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use
low-vibration and low-noise operating modes as well as wear personal protective
equipment. Take the following points into account to minimize the vibration and noise
exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
7
Advertisement
Table of Contents
