Display Setup - Panasonic BT-LH2550 Operating Instructions Manual

Main Menu
(continued)

DISPLAY SETUP

Sub menu Settings
TWO
L/S
WINDOW
M/M
SIZE
S/L
SUB INPUT
VIDEO
SEL.
SDI1
SDI2
YP P
B R
DVI-D
WFM/
OFF
VECTOR
WFM
VECTOR
POSITION
LB
RB
RT
LT
VECTOR
× 8
MODE
× 4
× 2
× 1
VECTOR
100%
SCALE
75%
TIME CODE
OFF
ON
POSITION
TOP
LEFT
CENTER
RIGHT
FONT SIZE
LARGE
SMALL
MODE
LTC
SELECT
VITC
LUB
VUB
CLOSED
OFF
CAPTION
ON
MODE
CC4
SELECT
CC3
CC2
CC1
*1 Available during HD-SDI input signals.
*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is
set to ON and underscan is also on.
*3 Opens the vector display during SDI signal input.
Description
Selects size of split-screen displays.
<L/S> main window LARGE, sub-window SMALL
<M/M> main window MEDIUM, sub-window MEDIUM
<S/L> main window SMALL, sub-window LARGE
Selects sub-window input in split-screen display.
/RGB
Switches between "WFM/VECTOR" waveform and vector display.
<WFM>
<VECTOR> Displays vector waveforms.
Selects the position for the "WFM/VECTOR" waveform display.
<LB>
<RB>
<RT>
<LT>
Enlarges vector waveforms.
<× 8>
<× 4>
<× 2>
<× 1>
Determines the scale of vector waveform.
<100%>
<75%>
Turns the time code display on and off.
Selects position of time code display.
<TOP>
<LEFT>
<CENTER> Bottom center of screen
<RIGHT>
Selects font size of time code display.
<LARGE> Twice the height and width of menu font size
<SMALL> Menu font size
Selects time code display mode.
<LTC>
<VITC>
<LUB>
<VUB>
Turns closed caption display on and off.
Selects the closed caption display mode.
Underlined values indicate factory defaults.
Displays waveforms.
Left Bottom
Right Bottom
Right Top
Left Top
*3
8×
4×
2×
1×
Displays it at 100% scale.
Displays it at 75% scale.
Top center of screen
Bottom left of screen
Bottom right of screen
*1
Displays linear time code (LTC).
Displays vertical interval time code (VITC).
Displays user bits included in LTC.
Displays user bits included in VITC.
*3
*1
*2
*2
*3
39