Advantage Sentra SR Series Reference Manual

• INSTALLATION • OPERATION • TROUBLESHOOTING •
Sentra SR Series with G300 Control Instrument
Maximum Setpoint : 300°F*
This reference guide covers standard Advantage temperature control units
This guide may be used for customized units using the G300 Series Control
Instrument even when the unit may not be physically the same as the units
Before Installing or Operating
1. A manual is available at
scanning the QR code on the back of this document. Download and read the manual before
starting installation.
2. This unit is designed to be used with water as the circulating fluid. The quality of fluid used in
your temperature control unit will greatly effect its short and long-term operation. Lack of as
well as improper water treatment can damage the temperature control unit by causing scale
build-up, excessive corrosion and/or bacterial contamination. It is the equipment owner's
responsibility to prevent damage caused by poor water quality. The services of a water
treatment professional is recommended.
3. Before installing and operating the unit, be aware of and follow any local laws and codes that
apply to the installation.
4. When contacting the Service Department always have the unit Model and Serial number from
the data tag located on the side of the unit.
REFERENCE GUIDE
with the G300 Series Control Instrument.
depicted in the included photos.
www.advantageengineering.com/Sentra-SR-G300_Manual
SERVICE DEPARTMENT
317-887-0729
*Reference the manual for requirements for 300°F set point.
or by