Advantage Sentra SR Series Reference Manual

Before Installing or Operating

1. This unit is designed to be used with water as the circulating fluid. The quality of
fluid used in your temperature control unit will greatly effect its short and long-
term operation. Lack of as well as improper water treatment can damage the
temperature control unit by causing scale build-up, excessive corrosion and/or
bacterial contamination. It is the equipment owner's responsibility to prevent damage
caused by poor water quality. The services of a water treatment professional is
recommended.
2. Before installing and operating the unit, be aware of and follow any local laws and
codes that apply to the installation.
3. When contacting the Service Department always have the unit Model and Serial
number from the data tag located on the side of the unit.
Sentra SR Series with V Control Instrument
REFERENCE GUIDE
Installation • OPERATION • TROUBLESHOOTING
Download and read the manual before starting installation. The complete
manual is available online at www.advantageengineering.com/Sentra-SRV.
SERVICE DEPARTMENT: 317-887-0729
*Reference the manual for requirements for 250°F set point.
Maximum Setpoint
250°F
This reference guide covers standard Advantage temperature
control units with the T Control Instrument. This guide may be
used for customized units using the T Control Instrument even
when the unit may not be physically the same as the units
depicted in the included photos.
*