Jet JCP Series Operating Instructions And Parts Manual page 6

JCP Cable Puller Trouble-Shooting
Trouble
Puller will not ratchet.
Puller will not ratchet in.
Puller will not ratchet out.
Possible Cause
1. Broken spring (L).
2. Broken ratchet tooth.
3. Frame bent.
1. Pawl (D) not in correct
position.
2. Spring (L) damaged.
1. Pawl not in correct position.
2. Spring (L) damaged.
3. Wire rope incorrectly spooled
onto ratchet drum.
6
Remedy
1. Replace cable puller.
2. Replace cable puller.
3. Replace cable puller.
1. Move forward/reverse latch
(B) to position as shown by solid
line.
2. Replace cable puller.
1. Move forward/reverse latch
(B) to position as shown by
dotted line.
2. Replace cable puller.
3. Remove wire rope and rewind
onto drum under tension.